1. Go to setup mode

Steps

1. Install USB driver on PC (only windows)

2. Connect device to PC, please refer to device Installation Manual.

3. Run config tool
   

4. Click USB icon
   

5. USB icon turns green and click “config mode” button
   

   If not sure which COM port is using, please check in PC device manager.
   

6. Power up, it shows messages in com port mean connect software successfully
   
   wait for “config mode”
   

NOTE
Go to Setup mode, the simcard and antenna is unnecessary, it’s only for configuration, device doesn’t connect network, like send sms, connect server etc.
After set up, please restart device to working mode to test.

Video Tutorial