Contents Search Fold The steps of configuration 1. Connect config tool 2. Setup I/O port 2.1 Digital input (DI) 2.2 Digital output (DO) 2.3 Analog input (AI) 2.4 Temperature input (TI) 2.5 counter 3. RS485 communication 3.2 Modbus slave mode 3.2 Modbus master mode 4. Network configuration 4.1 Ethernet settings 4.2 4G settings 4.2 Wi-Fi settings 5. Data transmission with server 5.1 Using CWTIO protocol. 5.2 Using MQTT protocol 5.3 Using http post protocol 5.4 When does the device upload data 5.5 Set system time 6. SMS setting(4G device's capability) 6.1 Set user numbers 6.2 DI sms setting 6.3 DO sms setting 6.4 AI sms setting 6.5 RS485 sms setting 6.6 Ti sms setting 7. About Modbus communication 8. Connect CWT cloud 8.1 Add CWT7100 on CWT cloud 8.2 Connect CWT cloud by 4G 8.3 Connect CWT cloud by Wi-Fi No search results! Number of views：235 Document is Published by MinDoc 4.1 Ethernet settings Ethernet settingsSetup Etherenet parameters in this page, like whether to enable DHCP and static IP. Author：admin Create time：2023-12-09 18:11Last editor：admin Update time：2023-12-11 10:03
Ethernet settingsSetup Etherenet parameters in this page, like whether to enable DHCP and static IP. Author：admin Create time：2023-12-09 18:11Last editor：admin Update time：2023-12-11 10:03
