Contents Search Unfold The steps of configuration1. Connect config tool2. Setup I/O port2.1 Digital input (DI)2.2 Digital output (DO)2.3 Analog input (AI)2.4 Temperature input (TI)2.5 counter3. RS485 communication3.2 Modbus slave mode3.2 Modbus master mode4. Network configuration4.1 Ethernet settings4.2 4G settings4.2 Wi-Fi settings5. Data transmission with server5.1 Using CWTIO protocol.5.2 Using MQTT protocol5.3 Using http post protocol5.4 When does the device upload data5.5 Set system time6. SMS setting(4G device's capability)6.1 Set user numbers6.2 DI sms setting6.3 DO sms setting6.4 AI sms setting6.5 RS485 sms setting6.6 Ti sms setting7. About Modbus communication8. Connect CWT cloud8.1 Add CWT7100 on CWT cloud8.2 Connect CWT cloud by 4G8.3 Connect CWT cloud by Wi-Fi No search results! Number of views：147 Document is Published by MinDoc 5.5 Set system time Set system timeSystem time can be synchronized with any NTP server.Device must be able to connect to the internet via Ethernet or 4G or Wi-Fi. Author：admin Create time：2023-02-15 02:48Last editor：admin Update time：2023-12-11 10:03
Set system timeSystem time can be synchronized with any NTP server.Device must be able to connect to the internet via Ethernet or 4G or Wi-Fi. Author：admin Create time：2023-02-15 02:48Last editor：admin Update time：2023-12-11 10:03
